উইকিশৈশব:এটা কীভাবে কাজ করে/বাল্ব: সংশোধিত সংস্করণের মধ্যে পার্থক্য

বিষয়বস্তু বিয়োগ হয়েছে বিষয়বস্তু যোগ হয়েছে
MdsShakil (আলোচনা | অবদান)
MdsShakil উইকিশৈশব:এটা কিভাবে কাজ করে/বাল্ব কে উইকিশৈশব:এটা কীভাবে কাজ করে/বাল্ব শিরোনামে স্থানান্তর করেছেন: শুদ্ধ বানান
সম্পাদনা সারাংশ নেই
ট্যাগ: মোবাইল সম্পাদনা মোবাইল ওয়েব সম্পাদনা
১ নং লাইন:
{{কাজ চলছে}}== Incandescent light bulb ==
[[File:LightbulbGlow.jpg|thumb|250px|right|Anএকটি incandescentপ্রদীপ্ত lightফিলামেন্ট bulbসহ withএকটি aভাস্বর glowingআলোর filament.বাল্ব]]
 
=== Whoএর inventedআবিষ্কর্তা itকে? ===
১৮০১ সালের প্রথম দিকে ইংরেজ বিজ্ঞানী হামফ্রে ডেভির দ্বারা বৈদ্যুতিক শক্তিকে আলোতে রূপান্তর করার পদ্ধতি পরীক্ষাগারগুলিতে প্রদর্শিত হয়েছিল, অনেক উদ্ভাবকের অবদানে বৈদ্যুতিক আলোর বাল্বের আধুনিক রূপটি তৈরি হতে ১০০ বছরেরও বেশি সময় লাগে।
While conversion of electrical energy to light was demonstrated in laboratories as early as 1801 by English scientist {{w|Humphry Davy}}, it took more than 100 years for the modern form of the electric light bulb to be developed, with the contributions of many inventors.
 
প্রথম সফল ভাস্বর আলোর বাল্ব তৈরি করেছিলেন ব্রিটিশ উদ্ভাবক স্যার জোসেফ সোয়ান। ১৮৫৯ সালে তিনি একটি খালি কাচের বাল্বে কার্বনাইজড কাগজের ফিলামেন্ট ব্যবহার করে একটি আলোর বাল্বে কাজ শুরু করেন।
The first successful incandescent light bulb was made by the British inventor Sir Joseph Swan. In 1850 he began working on a light bulb using carbonized paper filaments in an evacuated glass bulb.
১৮৬০ সালের মধ্যে তিনি একটি কার্যকরী যন্ত্র প্রদর্শন করতে সক্ষম হন এবং একটি আংশিক ভ্যাকুয়াম, কার্বন ফিলামেন্ট ভাস্বর বাতি আবৃত একটি ব্রিটিশ পেটেন্ট পান। পনের বছর পরে, ১৮৭৫ সালে, সোয়ান একটি ফিলামেন্ট হিসাবে একটি ভাল ভ্যাকুয়াম এবং একটি কার্বনাইজড থ্রেডের সাহায্যে আলোর বাল্বের সমস্যাটি বিবেচনা করতে ফিরে আসেন। সোয়ানের উন্নত বাতির সবচেয়ে উল্লেখযোগ্য বৈশিষ্ট্য ছিল যে ফিলামেন্ট জ্বালানোর জন্য ভ্যাকুয়াম টিউবটিতে সামান্য অক্সিজেন ছিল, এইভাবে ফিলামেন্টটি প্রায় সাদা-গরম উজ্জ্বল হতে দেয়। টমাস এডিসনের প্রায় এক বছর আগে ১৮৭৮ সালে সোয়ান তার ডিভাইসের জন্য একটি ব্রিটিশ পেটেন্ট পেয়েছিলেন। সোয়ান নিউক্যাসল কেমিক্যাল সোসাইটিতে সাফল্যের কথা জানিয়েছিলেন এবং ১৮৭৯ সালের ফেব্রুয়ারিতে সান্ডারল্যান্ড টেকনিক্যাল কলেজে একটি বক্তৃতায় তিনি একটি কার্যকরী বাতি প্রদর্শন করেছিলেন। সেই বছর থেকে তিনি ইংল্যান্ডে বাড়িঘর এবং ল্যান্ডমার্কে লাইট বাল্ব স্থাপন শুরু করেন। গেটসহেডের লো ফেলের কেলস লেনে তার আন্ডারহিল বাড়িটি বিশ্বের প্রথম ব্যক্তি যেখানে কাজ করা আলোর বাল্ব স্থাপন করা হয়েছিল। ১৮৮১ সালে তিনি তার নিজস্ব কোম্পানি দ্য সোয়ান ইলেকট্রিক লাইট কোম্পানি শুরু করেন এবং বাণিজ্যিক উৎপাদন শুরু করেন।
By 1860 he was able to demonstrate a working device and obtained a British patent covering a partial vacuum, carbon filament incandescent lamp. Fifteen years later, in 1875, Swan returned to consider the problem of the light bulb with the aid of a better vacuum and a carbonized thread as a filament. The most significant feature of Swan's improved lamp was that there was little residual oxygen in the vacuum tube to ignite the filament, thus allowing the filament to glow almost white-hot. Swan received a British patent for his device in 1878, about a year before Thomas Edison. Swan had reported success to the Newcastle Chemical Society and at a lecture at Sunderland Technical College in February 1879, he demonstrated a working lamp. Starting that year he began installing light bulbs in homes and landmarks in England. His house Underhill on Kells Lane in Low Fell, Gateshead was the first in the world to have working light bulbs installed. In 1881 he had started his own company, The Swan Electric Light Company, and started commercial production.
 
১৮৭৯ সালে, আমেরিকান টমাস এডিসন অন্যান্য ডিজাইনের সাথে ব্যর্থতার পর একটি অক্সিজেন-মুক্ত বাল্বে কার্বন ফিলামেন্ট ব্যবহার করে সোয়ানের ভাস্বর আলোক বাল্ব গ্রহণ করেন। অবশেষে তিনি একটি বাল্ব তৈরি করেছিলেন যা ১৫০০ ঘন্টারও বেশি সময় ধরে আলো তৈরি করতে পারে। তিনি সোয়ানের কাছে আদালতে একটি পেটেন্ট চ্যালেঞ্জ হেরেছিলেন, কিন্তু আমেরিকান পৌরাণিক কাহিনী লাইট বাল্ব আবিষ্কারের জন্য সোয়ানকে নয় বরং এডিসনের নাম প্রচার করে চলেছে।
In 1879, American Thomas Edison adopted Swan's incandescent light bulb using a carbon filament in an oxygen-free bulb after failures with other designs. He eventually produced a bulb that could produce light for over 1500 hours. He lost a patent challenge in court to Swan, but American mythology continues to promote Edison and not Swan for inventing the light bulb.
 
=== Howএটা doesকিভাবে itকাজ workকরে? ===
[[File:Illumination 2 (PSF).png|thumb|Constructionsবাল্বের of lightbulbঅংশ]]
আলোক বাল্বে আলো নির্গত হওয়ার মাধ্যম হিসাবে একটি টাংস্টেন ফিলামেন্ট রয়েছে। ফিলামেন্ট নামক আলোর বাল্বে একটি পাতলা টাংস্টেন তারের মধ্য দিয়ে বিদ্যুৎ প্রবাহিত হয়। একটি বাল্বে ব্যবহৃত ফিলামেন্টের "প্রতিরোধ" (রেজিস্টেন্স) নামে একটি বৈশিষ্ট্য রয়েছে। একটি বস্তু তার মধ্য দিয়ে প্রবাহিত বিদ্যুতের বিরুদ্ধে যে পরিমাণ ঘর্ষণ করবে তা হল প্রতিরোধ। টংস্টেন ফিলামেন্ট এমনভাবে তৈরি করা হয় যে এতে বিদ্যুতের অনেক প্রতিরোধ ক্ষমতা রয়েছে। এই প্রতিরোধের ফলে, ফিলামেন্ট উত্তপ্ত হয় এবং জ্বলতে শুরু করে, বৈদ্যুতিক শক্তিকে হালকা শক্তিতে রূপান্তর করে। এটি জুল-ইফেক্টের কারণে, যার মানে, যখন এগুলির মধ্য দিয়ে বৈদ্যুতিক প্রবাহ চলে তখন এগুলি তাপ তৈরি প্রতিরোধ করে। বিদ্যুৎ আলো এবং তাপে রূপান্তরিত হয়ে চারপাশকে আলোকিত করে।
The light bulb has a tungsten filament as the light emitting media. Electricity flows through a thin tungsten wire in the light bulb called the filament. The filament used in a bulb has a property called "resistance." Resistance is the amount of friction that an object will put against electricity flowing through it. Tungsten filament are manufactured in a way that it has a lot of resistance to electricity. As a result of this resistance, the filament heats up and starts glowing, converting electrical energy to light energy.
This is because of the Joule-effect, which means that resistances heat up when an electrical current runs through them. The electricity is converted into light and heat illuminating its surroundings.
 
=== এটি কতটা ক্ষতিকারক? ===
=== How dangerous is it? ===
সঠিকভাবে ব্যবহার করা হলে, লাইট বাল্ব নিজে বিপজ্জনক নয়। যদিও তাদের প্রাথমিক কাজ হল হালকা শক্তি উৎপাদন করা, কিন্তু পার্শ্বপ্রতিক্রিয়া হিসেবে তারা তাপও উৎপন্ন করে।
Light bulbs themselves, if used properly, are not dangerous. Although their primary function is to produce light energy, as a side effect they also produce heat.
 
লাইট বাল্বগুলি তারা যে পরিমাণ ওয়াট ব্যবহার করে তার উপর ভিত্তি করে বিক্রি করা হয় - সংখ্যা যত বেশি হবে, বাল্বটি তত উজ্জ্বল হবে এবং এটি তত বেশি শক্তি ব্যবহার করবে৷ গরম হওয়া সত্ত্বেও, আলোর বাল্বগুলি বিস্ফোরিত হয় না। যাইহোক, একটি লাইট বাল্বের বাইরের গ্লাস যা কিছু সময়ের জন্য চালু আছে তা বেশ গরম এবং সামান্য পোড়া হতে পারে, অথবা ভাঙা প্রান্তগুলি চামড়া কেটে ফেলতে পারে।
Light bulbs are sold according to the number of watts they use – the higher the number, the brighter the bulb is, and the more energy it uses. Despite getting hot, light bulbs don't explode. However, the outer glass of a light bulb which has been on for some time is quite hot and can cause minor burns, or the broken edges might cut the skin.
 
শত শত ঘন্টার অপারেশনের পর বাল্বের ফিলামেন্ট শেষ পর্যন্ত পুড়ে যায় এবং আলোর বাল্ব আর কাজ করে না। লাইট বাল্ব তারপর প্রতিস্থাপন প্রয়োজন. আলোর বাল্ব প্রতিস্থাপনে সতর্কতা অবলম্বন করা প্রয়োজন। প্রথমত, আলোর ফিক্সচারের সুইচটি বন্ধ করতে হবে বা তারের সংযোগ বিচ্ছিন্ন করতে হবে। এর কারণ হল সকেটের মধ্যে বিদ্যুৎ প্রবাহিত হয় যেখানে বাল্বের ধাতব অংশটি বসে থাকে আপনাকে একটি গুরুতর বৈদ্যুতিক শক দিতে পারে যদি আপনি সকেটের ভিতরে বা বাল্বের ধাতব বেসটি সকেটে আংশিকভাবে থাকা অবস্থায় স্পর্শ করেন। এ ছাড়া কাচ ভেঙে গেলে কেটে যাওয়ার সম্ভাবনা থাকে। বাল্বটি আঁকড়ে ধরার আগে এটির ধরার জায়গা ঠাণ্ডা আছে কি না তা নিশ্চিত করে এবং এটিকে শক্তভাবে ধরে রেখে ঘড়ির কাঁটার বিপরীত দিকে ঘোরানোর সময় কাঁচের সবচেয়ে মোটা অংশটি চেপে না ধরে এটি সম্পূর্ণরূপে আলগা করে ধরলে এই ধরনের বিপদ হ্রাস করা যেতে পারে।
After hundreds of hours of operation the filament in the bulb eventually burns out and the light bulb no longer works. The light bulb then needs replacing. It is necessary to be careful in replacing the light bulb. First, the switch for the light fixture needs to be turned off or the cable disconnected. This is because electricity flowing into the socket where the metallic part of the bulb sits can give you a severe electric shock if you touch the inside of the socket or the metal base of the bulb while it is still partly in the socket. In addition, if the glass breaks it is possible to get cuts. These hazards can be reduced by ensuring the bulb is cool to the touch before grasping it and by holding it firmly but not squeezing by the fattest part of the glass while rotating counter-clockwise until it comes completely loose.
 
=== Whatবাল্ব doesকি the bulb doকরে? ===
এটি বৈদ্যুতিক শক্তিকে আলোক শক্তিতে রূপান্তর করে আলো দেয়।
It gives off light by converting electrical energy into light energy.
 
যদিও আমরা বলি ফিলামেন্ট "পুড়ে যায়" এটি আসলে সময়ের সাথে সাথে বাষ্প হয়ে যায়। এর কিছু কিছু কাচের উপর অন্ধকার অংশ হিসাবে দেখা যায় যেখানে এটি শক্ত হয়ে জমে থাকে। কাচের ভিতরের ব্যবহৃত গ্যাসটি আর্গন। এটি ব্যবহার করা হয় কারণ এটি
Although we say the filament "burns out" it actually vaporizes over time.
নিষ্ক্রিয় এবং তাই ফিলামেন্টের সাথে বিক্রিয়া করে না।
Some of it can be seen as darkening on the glass where it has solidified.
The gas inside the glass envelope is argon, which is used because it is
inert and therefore cannot unite with the filament.
 
=== Howএটি doesকত it varyপ্রকার? ===
ফিলামেন্টের উজ্জ্বলতা, এর মধ্য দিয়ে প্রবাহিত কারেন্টের পরিমাণ (এম্পিয়ার) বা প্রান্তের মধ্যে ভোল্টেজ পরিবর্তন করে পরিবর্তিত হতে পারে, কারণ এম্পিয়ার ওহমের নিয়ম অনুসারে ভোল্টেজের সাথে সম্পর্কিত। এছাড়াও, ফিলামেন্টের বয়স বাড়ার সাথে সাথে এর উজ্জ্বলতা কিছুটা হ্রাস পাবে এবং এর আলো আরও লাল থেকে লাল হয়ে উঠবে। অবশেষে, সমস্ত ফিলামেন্ট ধীরে ধীরে বাষ্প হয়ে যাবে এবং এর মধ্য দিয়ে প্রবাহিত বিদ্যুতের কারণে উচ্চ তাপমাত্রার কারণে ব্যর্থ হবে।
The brightness of the filament can be varied by changing the amount of current flowing through it (the amperage), or the voltage between ends, as the amperage is related to the voltage by [[Electronics/Ohm's Law|Ohm's law]].
Also, as the filament ages, its brightness will diminish somewhat and its light will get redder and redder. Eventually, all filaments will slowly vaporize and fail due to the high temperature caused by the electricity flowing through it.
 
[[File:City of London at night.jpg|thumb|300px|right|বৈদ্যুতিক আলো মানুষকে বড় বিল্ডিংগুলিতে বসবাস এবং কাজ করতে সুবিধা করে। এটি ইংল্যান্ডের লন্ডন শহরের একটি ছবি যা রাতে বিভিন্ন ধরণের আলোর বাল্ব দ্বারা আলোকিত হয়।]]
[[File:City of London at night.jpg|thumb|300px|right|The electric light allows people to live and work in big buildings. This is a picture of the city of London, England at night lit by different kinds of light bulbs.]]
 
=== এটি কিভাবে পুড়ে যায়? ===
=== Why does it burn out? ===
নকশা অনুসারে, একটি আলোর বাল্বটিতে অক্সিজেন নেই। প্রস্তুতকারক এটিকে আর্গন বা নাইট্রোজেনের মতো নিষ্ক্রিয় গ্যাস দিয়ে পূর্ণ করে। যাইহোক, এটি তীব্র তাপের কারণে ফিলামেন্টের পৃষ্ঠ থেকে পরমাণুগুলিকে পপ করা থেকে বাধা দেয় না। এটি ফিলামেন্টকে পাতলা এবং পাতলা করে তোলে। অবশেষে, এটি এত পাতলা হয়ে যায় যে এটি ভেঙে যায়। অল্প সময়ের জন্য, দুটি ভাঙা প্রান্ত একে অপরের খুব কাছাকাছি, এবং বিদ্যুৎ একটি উজ্জ্বল নীল স্পার্কের মধ্যে ঝাঁপিয়ে পড়তে পারে। যাইহোক, দুটি ভাঙা প্রান্ত শীঘ্রই একে অপরের থেকে দূরে পড়ে যায়, স্পার্ক ভেঙে বাল্বটি আর জ্বলে না।
By design, a light bulb has no oxygen in it. The manufacturer fills it with an inert gas like argon or nitrogen. However, this does not prevent atoms from popping off the surface of the filament due to the intense heat. This makes the filament thinner and thinner. Eventually, it becomes so thin that it breaks. For a short period of time, the two broken ends are very close to each other, and electricity can jump across in a bright blue spark. However, the two broken ends soon fall away from each other, breaking the spark, and the bulb will light no more.
 
=== এটি পৃথিবী কে কিভাবে প্রভাবিত করেছে? ===
=== How has it changed the world? ===
The light bulb is probably one of the most significant inventions in science.